Wireless IR Motion Sensor for PiSECTOR Home Alarm Security System WIRMS-05

Wireless IR Motion Sensor for PiSECTOR Home Alarm Security System WIRMS-05
Product Code: WIRMS-05
Reward Points: 0
Availability: In Stock
Price: $39.99
   - OR -   
  • Microprocessor-controlled pet-immune sensors for detecting motion of objects above 50 lbs with pre-analysis before alerting to minimize false alarms.
  • PiSector Infrared Motion Sensor is industrial motion sensor, made in high quality components and material, The motion sensor afford you a reliable and trustable detector function and maximum reduce false alarm.
  • Intelligent Data Analysis system build in to refuse the false signal. more accurate to detector real intruder. The intelligent Data Analysis system analyses the real intruder signal or false signal.
  • Bi-directional temperature compensation over a wide operating temperature range to better support excellent detection probe

Product Description

Technical details: Transmission distance: up to 250 feet
Detecting range: up to 36 feet
Detecting angle: 90 degrees horizontal, 60 degrees vertical
Power supply: DC3V battery (included)
Operating current: <25mA

PiSECTOR Passive Infrared Motion Sensor is industrial  motion sensor, made in high quality components and material, The motion sensor afford you a reliable and trustable detector function and maximum reduce false alarm. Intelligent  Data Analysis system build in to refuse the false signal. more accurate to detector real intruder.  The intelligent Data Analysis system analyses the real intruder signal or false signal. Bi-directional temperature compensation over a wide operating temperature range to better support excellent detection probe

Prepare Motion Sensor

  1. Separate the Front and back Covers of the Motion Sesnsor by pressing the tab with your finger or the top of a pen . Insert the battery
  2. Remove insulating paper for battery
    S1 switch for LED signal light, if you do not like a flash light when sensor detector intruder, you can turn it off, default is on, if battery low the LED light become yellow.
    S2 keep S2 at CH position, Enable low battery notification, keep S2 at DF position disable the low battery notification. Default CH
    Hint: S2 default CH, if you have Pisector system ALMS02, GSM01,GSM02,GSM03,GSM05, GSM06, you must keep S2 to DF, otherwise it will not compatible with the main unit.

Mount Motion Sensor

  1. Place the motion sensor following the location recommendations ( check marked locations) shown in Figure C. Avoid the example location marked with the "X" which are household areas that typically cause false alarms, such as heat, air conditioning, fans, or direct sunlight. The recommended mounting height is 7.0 feet for both coverage and` pet immunity purposes
  2. Apply the 3M adhesive tape in the locations shown in Figure D for corner mounting or wall mounting

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By OpenCart
PiSECTOR Inc. © 2017